Offer / Questionnaire covering the design of Uhing®-Non-Contact Flange Detecting System FA II

non-contact-flange-detecting-system-uhing-1.jpg

1. Questionnaire

FA Questionnaire

Please use the pdf-Questionnaire, if you prefer to download and print the questionnaire. Send it afterwards by post or fax. To send the Questionnare immediately, please choose point 2 ONLINE - Questionnaire.

-------------------------------------------------

2. ONLINE - Questionnaire

Click the appropriate option or answer as precisely as possible.
Then fill in your complete address and click "Send" to send us your enquiry.

Facts of Use:
1. Material to be wound:
2. Max. dimensions of above material:
3. Max. winding tension:
FZug=
N
4. Geometry of spool:
4.1. Spool barrel diameter:
D1 =
mm
4.2. Spool flange diameter:
D2 =
mm
4.3. Remaining flange area:
R =
m/s
4.4. Material of spool(s):
5. Traverse pitch (per revolution of spool):
5.1. maximum pitch required:
dmax =
mm
5.2. minimum pitch required:
dmin =
mm
6. Speed of the material to be wound:
Vw =
m/s
7. Speed of drive shaft constant?
7_7. Drehzahl der Verlegewelle konstant?:
8. Please indicate dimensions on the following sketch:
A =
mm
B =
mm
C =
mm

9. Payload:
mZ =
kg
10. Operating mode:
10_Einbaulage:
11. Ambient temperature:
°C
12. Average time of operation:
hours/day
13. Additional protection against dust required:
13_Zusaetzlicher_Staubschutz:

Please enter your address here. All fields marked with * are mandatory and must be filled in before your request can be processed.
Company*:
Contact partner*:
Street*:
ZIP code*:
Place*:
Region:
Country:
Phone number*:
Fax number:
Email:
Datenschutz: 1 *

 


Joachim Uhing GmbH & Co. KG
Konrad-Zuse-Ring 20
24220 Flintbek, Germany

Tel. / Phone +49 (0) 4347 906-0
Fax Vertrieb +49 (0) 4347 906-40
Fax Einkauf +49 (0) 4347 906-31

E-mail: sales@uhing.com
Internet: www.uhing.com